Yacht furniture is furniture made for a room that moves. Compared with pieces for a house, loose furniture for a superyacht has to stay light, be secured for passage, fit curved walls and narrow access routes, and be upholstered for salt air and strong sun on the open decks. Comfort and finish should match a well-furnished home; what changes is the planning around them.
Sitdesign produced the loose furniture for two Bilgin Yachts superyachts, CAMILA and AL REEM. We have been making furniture since 1983, and every piece is handmade in our own factory in Büyükçekmece, Istanbul. This article explains, from a furniture maker's side, what is different when the room is on board.
CAMILA, built by Bilgin Yachts. Sitdesign produced the yacht's loose furniture.
Loose furniture and fixed joinery are two different jobs
On a yacht, the interior is split into two kinds of work. Fixed joinery – wall panels, built-in cabinets, ceilings and other parts attached to the structure – is part of the build itself. Loose furniture is everything that can be lifted and moved: sofas, armchairs, chairs, bar stools, poufs and tables. On CAMILA and AL REEM, our part was the loose furniture.
The distinction matters because loose pieces follow the joinery, not the other way round. A sofa meets a curved panel, an armchair sits beside a built-in unit, a pouf has to clear a door swing. So loose furniture for a yacht is usually drawn once the main layout is fixed, using the shipyard's drawings and measurements taken on board.
CAMILA's saloon: sofa, chairs, a pouf and bar stools share one open space.
Weight, securing and rounded edges
At home nobody weighs a sofa. On a yacht, weight is part of the vessel's calculations, and every piece adds to it. That does not mean building flimsy furniture; it means not adding mass where it does no work. Our upholstered frames are kiln-dried beech, and seats use high-resilience (HR) foam with sprung seating – a combination that stays comfortable without a heavy structure.
The second difference is movement. Even at anchor a yacht rolls a little, and on passage the motion can be strong. The general points to plan for:
- Securing: non-slip feet, fixing points to the floor or deck, and how each piece is held during passage are agreed with the shipyard before production.
- Doors and drawers: any cabinet or storage piece needs latches so it cannot open on its own.
- Rounded edges: table corners, arm ends and plinths are softened, because people move around a moving room and sometimes lose their balance.
- Stable proportions: wide bases and a low centre of gravity for anything tall, such as consoles or lamp tables.
On AL REEM, for which Sitdesign produced the loose furniture.
Curved walls, sloped spaces and the route on board
Few rooms on a yacht are square. Hull walls curve, ceilings step down, floors change level between saloon and deck, and windows follow the shape of the superstructure. A standard sofa pushed against a curved wall leaves gaps and looks temporary. That is why pieces are drawn to the real space: we work from templates and on-site measurement, and custom dimensions are made on request.
Then the piece has to get there. Doors on board are narrower than at home, stairs turn tightly, and some spaces are reached only through hatches. Before production, the route from the dock to the room is checked. Large sofas are often built in sections that join in place, and long benches can be split into modules. A piece that cannot be carried in is no use, however well it fits the drawing.
Bar stools need the right height and footrest position – and a plan for how they stay in place at sea.
Upholstery on deck and indoors
On the open deck
Outdoor decks see salt spray, humidity, strong UV light and rain. As general guidance, deck furniture needs:
- Fabrics: outdoor-rated, colourfast fabrics that resist UV and can be rinsed of salt.
- Fills: quick-drying cushion fills, so seats do not stay wet after rain or washing down.
- Hardware: marine-grade stainless steel fittings, since ordinary metal parts corrode in salt air.
- Covers: removable covers that can be cleaned, and a place to stow cushions when the yacht is under way.
The exact specification for each deck is decided with the shipyard, as part of the vessel's own requirements.
Deck dining on AL REEM, under the cover of the deck above.
The aft deck lounge on AL REEM, open to sea air and sun for most of the day.
Indoors
Inside, leather and fabric behave much as they do at home, with one difference: yachts have large windows and a lot of light reflected off the water. For saloons and cabins we work in genuine leather – 76 colours in 12 colour families, with Italian leathers as our top leather group – or in fabric, and we also accept customer's own material (COM). In very bright rooms, colour and finish should be chosen with sunlight in mind; our note on daylight and leather colours covers this in detail. Samples are available on request, and it is worth looking at them in the actual light on board – see what to check in leather and fabric samples.
A cabin on AL REEM: the armchair sits by the window, where daylight is strongest.
How a yacht furniture project runs
Most yacht work starts with drawings: the general arrangement and interior layouts from the shipyard or the interior designer. From there, the steps are fairly consistent:
- We review the drawings and give technical support at the design stage – sizes, seat heights, frame construction and how each piece will be split for delivery.
- Measurements are confirmed on board, and templates are made for curved or sloped walls.
- Leather and fabric samples are approved, for the interior and for the decks.
- The pieces are made in our factory, and delivery is planned around the yacht's schedule.
Our upholstered pieces normally take 3–4 weeks; on a yacht project the timing is planned together with the shipyard, because the furniture has to arrive when the rooms are ready for it. To see what sits under the cover, our article on frame and upholstery explains the structure, and bespoke details shows how custom sizes and a built-in look are worked out. Our sofas and armchairs are useful starting points, and more of our work is on the projects page.
Frequently asked questions
What is loose furniture on a yacht?
Loose furniture is every piece that is not built into the structure: sofas, armchairs, chairs, bar stools, poufs and tables. Fixed joinery, such as wall panels and built-in cabinets, is part of the build.
How is furniture secured on a yacht?
Usually with a combination of non-slip feet, fixing points to the floor or deck, and latches on anything that opens. The method for each piece is agreed with the shipyard before production.
Can yacht furniture be upholstered in leather?
Yes, indoors. Genuine leather works well in saloons and cabins, with the colour chosen for strong daylight. On open decks, outdoor-rated fabrics and quick-drying fills are the usual choice.
Furnishing a yacht? Send us the deck plans or interior layouts through our contact page and ask for leather and fabric samples. You are also welcome to visit our factory in Büyükçekmece and see the showroom.







